Oche elu ígwè lathe JY250V JY250VF
Igwe Lathe Na-atụgharị Bench
Akwa V-way siri ike ma dịkwa n'ala nke ọma.
A na-akwado spindle site na iji ihe na-agba ígwè nke a na-akpọ "tapered roller bearing".
MT4 spindle bore na-enye ohere ka ukwuu ikike.
Chuck nke ọma.
Mpịakọta obe T-slotted.
Nri ogologo oge ike na-enye ohere iji eriri.
Gibs ndị a na-agbanwe agbanwe maka ụzọ slideways.
Nhazi kachasị elu nke gearbox na-enye ohere ịrụ ọrụ karịa.
Ịcha eriri aka nri na aka ekpe dị.
A pụrụ ịgbanwe Tailstock maka ịtụgharị taper.
Ejiri eriri na bọọdụ njikwa dị elu rụọ ọrụ..
Asambodo ule ndidi, eserese usoro ule dị na ya.
Nkọwapụta:
| NLEZI | JY250/JY250V/JY250VF |
| Anya dị n'etiti ebe etiti | 550mm/750mm |
| Fegharịa n'elu ihe ndina | 250mm |
| Magharịa n'elu ihe ndọda obe | 145mm |
| Obosara nke akwa | 135mm |
| Mkpọchi nke spindle mịpụtara | MT4 |
| Spindle mịpụtara | 26mm |
| Ọnụọgụ ọsọ spindle | 6/ọsọ na-agbanwe agbanwe |
| Oke ọsọ spindle | 125-2000/50-2000rpm |
| Oke nke nri ogologo oge | 0.07 -0.20mm /r |
| Oke eriri inch dị iche iche | 8-56T.PI |
| Oke nke eriri metric | 0.4 -3.5mm |
| Njem slide kachasị elu | 50mm |
| Njem slide obe | 115mm |
| Njem Quill Tailstock | 70mm |
| Taper nke quill tailstock | MT2 |
| Moto | 550/750W |
| Nha ngwugwu | 1150/1350 × 560 × 570mm |
| Nha ịbụ | 120kg / 140kg |
| Ngwa ọkọlọtọ | Ngwa Nhọrọ |
| 3-agba chuck Ebe ndị nwụrụ anwụ Aka uwe mbelata Gbanwee gia Egbe mmanụ Ngwaọrụ ụfọdụ
| Izu ike zuru ike Soro izu ike Efere ihu 4-agba chuck Ebe obibi ndụ Ntọala guzo Ngwaọrụ ntụgharị Dial ịchụ nta eriri Mkpuchi skru ndu Mkpuchi ogidi ngwaọrụ Brekị akụkụ |
