Igwe igwe kwụ ọtọ nke na-atụgharị lathe CQ6240
| NLEZI | CQ6240 |
| Fegharịa n'elu ihe ndina | Φ400mm |
| Magharịa n'elu ihe ndọda obe | Φ250mm |
| Mfegharị n'ime oghere (D × W) | 520mm × 100mm |
| Ogologo nke etiti | 200mm |
| Anya dị n'etiti ebe etiti | 1080mm |
| Ogologo Mgbanwe | 700-750mm |
| Obosara nke akwa | 218mm |
| Ngalaba kachasị elu nke ngwaọrụ ịkpụcha | 20mm × 20mm |
| Nduzi Ogologo ụgbọ ala | 350-365 |
| Ngụcha akwụkwọ nke Longitudinal scale na apron boxhand wheel | 0.2mm |
| Njem niile nke cross slaịd | 230mm |
| Ngụcha nke nha na cross slide spindle | 0.025mm |
| Obosara nke cross-slaịd | 118-140mm |
| Njem mmịfe dị mgbagwoju anya | 68-100mm |
| Ngụcha nke nha na spindle slide compound | 0.05mm |
| Obosara nke slaịd dị n'elu | 110mm |
| Njem niile nke slaịd elu | 120mm |
| Dayameta spindle n'ihu na-ebu ibu | 60mm |
| Spindle mịpụtara | 52mm |
| Taper bore dịka DIN 228 si dị (emechiri emechi) | MT-4 |
| Dayameta kachasị elu nke efere ihu na diski clamping | 315mm |
| Imi spindle | D1-5 |
| Oke ọsọ spindle | 65-1800 RPM |
| Dayameta na eriri Leadsskru | 24mm × 4 TPI ma ọ bụ pitch 6mm |
| Egwuregwu ndị e ji eme ihe | TPI 4-60 |
| Ụdị metric nke eriri | 0.4-16mm |
| Nri ogologo oge (imperial/metric) | 0.0021"-0.0508"/0.0527-1.2912 |
| Nri obe (imperial/metric) | 0.00043"-0.0109"/0.011-0.276 |
| Njem niile nke quill tailstock | 110mm |
| Dayameta nke aka uwe etiti | Φ52mm |
| Oghere taper | DIN 228 MY3 |
| Ngụcha akwụkwọ nha n'elu aka uwe etiti | 1mm |
| Mgbaaka nha na ọdụ nke spindle, nha nha | 0.05mm |
| Nkịta taper taper | MT#4 |
| Njem Ngagharị | 10MM |
| Ọnụọgụ nke oke ọsọ | 2x8 |
| Oke ọsọ A | (50-350) rev/min 8 ọsọ |
| Oke ọsọ B | (250-2000) Mgbanwe/nkeji 8 ọsọ |
| Ọkwa ike ụda dịka Din 45635-16max si dị | 93 db (a) |
| Moto mbanye spindle | 1.5KW(2.0HP) |
| Moto mgbapụta oyi | 4/75HP (40W) |
| Nha ngwugwu | 1940 × 890 × 1040 |
| NW/GW | 640/750KG |
Ngwa ndị ọkọlọtọ:
• Efere ụgbọala dịka ọ dị na spindle dia 160mm: 1 Nos.
• chuck anọ nke nwere onwe ya n'agba 160mm: 1 Nke.
• Atọ agba nke na-elekwasị anya n'onwe ya na dia 160mm: 1 Nke.
• Ozi ngwa ngwa maka mgbanwe ngwaọrụ: 2 Nke.
• Oriọna igwe: 1 Nke.
• Ebe a na-agbagharị agbagharị: Nọmba 2.
• Setịpụ nke kọllets 15 Nos (5mm ruo 20mm n'usoro nke 1mm): 1 Nos.
• Ndị na-ebu nkịta Dia. 20 Dia. 30:2 Ọnụ.
• Ihe njide kọllet: Otu Set
• Ndị Nche Mkpọsa
• Ngwa Ngwaọrụ: Otu Setị
