Igwe igwe igwe ụdị ikpere X5032
Atụmatụ igwe igwe kwụ ọtọ:
Ụdị ikpere kwụ ọtọ X5032Igwe igwe igwe, nwere njem ọzọ na ogologo oge, njikwa ọrụ na-eji panel cantilever. Ọ dabara maka ịkpụ ihu dị larịị, gbagọrọ agbagọ, elu akụkụ, oghere site na iji ihe ịkpụ diski, ihe ịkpụ akụkụ. Mgbe etinyere ya na index, igwe ahụ ga-enwe ike ịrụ ọrụ ịkpụ ihe na gia, ihe ịkpụ ihe, oghere helix, cam na wiil tub.
Enwere ike ịtụgharị isi igwe kwụ ọtọ site na ± 45°. Enwere ike ibugharị quill spindle n'okirikiri. Enwere ike iji aka na ike rụọ ọrụ mmegharị ogologo, obe na kwụ ọtọ nke tebụl ahụ, enwere ike ibugharị ya ngwa ngwa. Tebụl na ụzọ eji eme ihe na slide ejiri mee ka ihe sikwuo ike na-eme ka o doo anya na ọ dị mma.
Nkọwapụta:
| Nkọwapụta | UNIT | X5032 | X5032B |
| Nha tebụl | mm | 320X1325 | 320X1600 |
| Oghere T (NO./Obosara /Ogwe) |
| 3/18/70 | 3/18/70 |
| Njem ogologo oge (aka/akpaaka) | mm | 700/680 | 900/880 |
| Njem njem (aka/akpaaka) | mm | 255/240 | 255/240 |
| Njem kwụ ọtọ (aka/akpaaka) | mm | 350/330 | 350/330 |
| Ọsọ nri ngwa ngwa | mm/min | 2300/1540/770 | 2300/1540/770 |
| Spindle mịpụtara | mm | 29 | 29 |
| Mkpụcha spindle |
| 7:24 ISO50 | 7:24 ISO50 |
| Oke ọsọ spindle | r/nkeji | 30-1500 | 30-1500 |
| Nzọụkwụ ọsọ spindle | nzọụkwụ | 18 | 18 |
| Njem Spindle | mm | 70 | 70 |
| Isi igwe kwụ ọtọ nke isi igwe kwụ ọtọ |
| ±45° | ±45° |
| Anya dị n'etiti imi spindle na elu tebụl | mm | 60-410 | 60-410 |
| Anya dị n'etiti axis spindle na ụzọ ntuziaka kọlụm | mm | 350 | 350 |
| Nri moto ike | kw | 2.2 | 2.2 |
| Ike moto isi | kw | 7.5 | 7.5 |
| Nha niile (L×W×H) | mm | 2294 × 1770 | 2294 × 1770 |
| Nha ịbụ | kg | 2900/3200 | 2900/3200 |
