Igwe ọkụ zuru ụwa ọnụ CQ6236F
Atụmatụ:
1. Akwa V-ụzọ nke e ji ọkụ rụọ, nke siri ike nke ọma.
2. Ejiri ihe e ji agbagharị agbagharị nke ọma kwado spindle D1-4.
3. Gia ala siri ike, nke ziri ezi na isi.
4. Nnukwu ihe nkedo kpọmkwem maka ịkwanye ihe.
5. Ihe eji achịkwa spindle nke e ji ebu ibu.
6. Nri na eriri akpaka ejikọtara ọnụ nke ọma.
7. A pụrụ ịgbanwe Tailstock maka ntụgharị taper.
| Ụdị nlereanya | CQ6236F | ||
| Ikike izugbe | Fegharịa n'elu ihe ndina | mm | 356 (14”) |
| Gbaa ụgbọ ibugharị n'elu ya | mm | 220(8-5/8”) | |
| Gbanye n'elu oghere | mm | 506(20”) | |
| Obosara nke akwa | mm | 206(8-1/8”) | |
| Anya dị n'etiti ebe etiti | mm | 1000/750(40”/30”) | |
| Isi spindle | Mkpọchi nke spindle mịpụtara | MTNO.5 | |
| Dayameta nke spindle site na oghere | mm | 38(1-1/2") 52 | |
| Ọnụọgụ ọsọ spindle | 16 2 Mpaghara | ||
| Oke ọsọ spindle | r/nkeji | 45~1800rpm | |
| Imi spindle | D1-4 | ||
| Ịhazi na inye nri | Eriri pitch nke Metro | mm | 0.45~7.5 (ụdị 22) |
| Eriri ndị bara uru nke Whit-worth | tpi | 4~112 (ụdị 44) | |
| Oke nke nri ogologo oge | mm | 0.043-0.653(0.0012”-0.0294”n/mgbanwe) | |
| Oke nke nri obe | mm | 0.015-0.220(0.0003”-0.01”n/mgbanwe) | |
| Ntugharị Leads | Dayameta nke ndị na-eduzi ihe nduzi | mm | 22(7/8”) |
| Eriri pitch nke leadscrew | mm | 4 (8tpi) | |
| ọdụdụ ọdụ | Njem nke quill tailstock | mm | 120(4-3/4”) |
| Dayameta nke skwịl ọdụ | mm | 45(1-25/32”) | |
| Oghere dị warara nke quill ọdụ | MTNO.3 | ||
| Ike | Ike moto bụ isi | Kw | 1.5/2.4(3HP) |
| Ike moto nke mgbapụta mmiri oyi | Kw | 0.04(0.055HP) | |
| Akụkụ mkpokọta | mm | 1880X740X1460 | |
| Nha ịbụ | Kg | 1000 | |
| Mkpokọta nha | Kg | 1100 | |
