Igwe eji arụ ọrụ zuru ụwa ọnụ GH1440W
Atụmatụ igwe ihe eji asa ihe ndina nke GAP:
1. Akwa dị elu nke a na-emenyụ ma na-egweri ihe ndina;
2. Nzọụkwụ iri na abụọ nke ọsọ spindle
3. Ike moto bụ isi bụ 2.4 kw
4. Brekị ụkwụ nwere ike inye brek ngwa ngwa
5. Bọtịnụ Scram nke dị na lathe
6. Enwere ike ịgbagharị spindle ka ọ tụgharịa, ọ na-eme ka ọ dịrị mfe ịgbanwe gia, ibu ibu ma ọ bụ butuo ihe ndị a na-arụ ọrụ.
7. Ite chip nke e mere nke ọma nwere ike ịdị mfe iwepụ chips ndị ahụ.
8. Lathe ahụ nwere ihe nchekwa iji gbajie ike na akpaghị aka mgbe ị na-agbanwe gia ma ọ bụ eriri.
Atụmatụ:
| Nkọwapụta | NLEZI | GH-1340W | GH-1440W | |
| Ike Izugbe | Wax. Ịfegharị n'elu akwa | mm | 330 | 356 |
| Mfegharị n'elu slide cross kachasị elu | mm | 185 | 210 | |
| Kachasị elu oghere | mm | 480 | 506 | |
| Obosara akwa | mm | 260 | ||
| Oke anya dị n'etiti ebe etiti | mm | 1000 | ||
| Spindl | Mkpọchi nke spindle mịpụtara |
| MT5 | |
| Dayameta nke spindle mụụrụ | mm | 40 | ||
| Nzọụkwụ nke ọsọ spindle |
| Nzọụkwụ iri na abụọ | ||
| Oke ọsọ spindle | r/nkeji | Afọ 40-1800 | ||
| imi spindle |
| D-4 | ||
| Ịhọrọ na Ịnye Nri | Oke eriri metric | mm | 0.45-7.5 (ụdị 22) | |
| Oke eriri inch | TPI | 4-112 (ụdị 40) | ||
| Oke nke nri ogologo oge | mm | 0.03-0.688(0.0011-0.0271inch/mgbanwe) | ||
| Oke nke nri obe | mm | 0.015-0.220(0.0003-0.01inch/mgbanwe) | ||
| Ntugharị Leads | Dayameta nke ndị na-eduzi ihe nduzi | mm | 22(7/8inch) | |
| Eriri pitch nke leadscrew | mm | 4(8T.PI) | ||
| ọdụdụ | Njem nke quill tailstock | mm | 120 (4-3/4inch) | |
| Dayameta nke skwịl ọdụ | mm | 45 (1-25/32inch) | ||
| Taper nke quill tailstock | mm | MT #3 | ||
| Ike | Ike moto bụ isi | kw | 2.4 (3HP) | |
| Ike mgbapụta oyi | kw | 0.04(0.055HP) | ||
| Nha Mbupụta nkeLathe(L*W*H) | mm | 1900*740*1150 | ||
| Nha ngwugwu nkeLathe(L*W*H) | mm | 1970*760*1460 | ||
| Nha ịbụ | kg | 945 | ||
| Mkpokọta nha | kg | 1065 | ||
